NC Iowa | So I updated my montag control valve to the PWM they suggest vs the fast one it had on it. Anway's having some serious issues now:
Setting up the controller I am making sure it is PWM, Frequency is set to 110 and revolutions at 36. However when I do this I get an error code that goes Rate Flow Sensor Not Detected. I'm at a loss because I decided to try going with Servo valve just to see if the motor would turn at all. Low and behold it started turning great except even with master switch off it wont shut off! No clue what to do or where to start. Any help would be great. |