NW Central Iowa (Fort Dodge) | I reseantly bought a Trimble AutoPilot and controlling with a Ag Leader Insight. I am calibrating with AP toolbox.
I have a 2002 MX270 with a 3 point (quick Attach) Cyclo 900 12 row. OmniStar HP - 252
1. Should I calibrate with the planter on the tractor (its a 3 point planter)?
2. If yes should I calibrate with the planter in the air or in the ground?
3. Should I calibrate with no implements attached?
4. Does it matter if I calibrate in feild conditions, or will a a concrete packing lot work fine? (in Iowa it is WET!!)
What is the most accurate way to calibrate for the Autopilot
Edited by magnumman 4/11/2008 10:33
|
Calibrating Auto Pilot
