|
Culloden | I just started mapping with my pro 600 and we run an 36 foot draper that is off set 2 feet to the right. But having a problem getting the right cut width in auto cut. In the tool box page in head1 have the head offset set at 2 feet ( or should it be set at -2 ft) or where you can set your gps reciever settings should the gps offset to the right be left at zero or moved over at 2ft as well? have did a bunch of different things and still will have showing the combine cutting 2 less feet one way | |
|
Pro 600 and mapping
