|
Ks | I was told I could control half width disconnects on a 1760 jd planter with a John Deere rate controller for section control..I got the harness from ag express and it plugged right in to my clutches. I set up the rate controller for planter with 2 sections.. I did a section test and nothing happens.. these clutches take a positive wire in the off position so they are always in plant mode when there is no power to them.. I checked voltage at the clutches and there is no difference in the on or off positions..there is zero voltage so I don’t know if the rate controller is doing anything.. what am I missing.. | |
|
Controlling half disconnects with jd rate controller
