|
Eastern Kansas | Thought the cab solonoid was going bad do replaced it. The old one you needed to jump the 2 terminals for 5 minutes or so then all was good. Put a new style on and grounded it and everything. Turned on the key and the dash lights flickered some and then went out. I now don't have any power with the key. The one side of the cab solonoid has 12v power. There is a flat fuse type deal on the floor with 2 terminals, both have 12 volt power. The bus bar side with constant hots are good. When you turn the key on I don't have any power to any of the keyed functions, no cab fan, no power to any fuses or the keyed side of the bus bar. Any ideas? Am I missing another cab fuse? | |
|
7150 magnum no key power
