|
Rivers, MB | We have a Raven Supercooler that we are putting on a 57' JD 1810. Wanting to run section control so that I can turn off the manifolds that are overlapping.
Is there a minimum flow (lb/min, ga/min etc.) that a 2 valve system can handle. No point in having a section so small on the applicator that the control system can't handle such low flow.
Would you put the on/off vavles for the individual manifolds right close to the manifolds or right after the splitter that splits the flow to the various manifolds.
Using squibb taylor manifolds (16 run). Can i run different amounts of hoses off different manifolds or do I need to get them as close to even as possible. Our applicator is a 5 fold but the different folds are different widths. Would be nice to have one manifold/section.
Thanks in advance.
| |
|
section control - NH3 - more questions
