|
Kansas | I used it on a leak I found in the grain tank the other night. First wad I put up there fell off after turning my back for an hour. Second pass I mixed up and put on I stuck some gray tape (duct tape) over to hold in place and let it set over nite. This was in about 40 degree weather though and it was good enough by next day (14 hour cure time) that I could go and use the combine and it held.
Now, I like the idea given above about using a heat lamp. Sure wouldn't hurt nothing. Just mix it and get it ready on a piece of cardboard in the house and then run out and put it on and leave it alone. I wouldn't look at it for several hours. | |
|
JB WELD in the cold
