|
northeast ohio | The current installation guide (china) on the Trimble website shows the special NAV to SAM200 cable. This changed from last fall when it showed using a standard NAV and EZPilot cabling joined by a short "jumper" cable which appeared to be the four CAN wires. It also used a wheel angle sensor which is not shown with the current version. I have no idea if using a jumper is still an alternative to buying the new harness.
Edited by neo_ag 2/23/2017 22:32
(IMG_8115.PNG)
Attachments ---------------- IMG_8115.PNG (61KB - 162 downloads)
| |
|