|
SE Wisconsin | How many hours on those if I may ask? I just turned mine for the first time at 3300 hours. Probably should have done it last year. I took the sloped pan off the axle and knelt on it covered with an old blanket. Used a long 1/2" breaker bar and 6 point shallow socket letting a long box wrench hit the raised chopper pan so I didn't have to fight it so much. The end ones sucked the most. Hooked 2 wrenches together to get those as I didn't have a shallow enough socket. I just took my time and finally got em. | |
|
Time to change the chopper blades again...sigh (Axial flow with pics)
