|
| There is a newer software update for AGI-4 and C1000 monitor if older monitor and receiver will want to update. Also make sure you go to vehicle setup and make sure to input all measurements into the screen and don't guess use actual measurements and put all of them. Topcon is picky on their measurements. I just got one of these units working last month and it does work I had to work through same issue you are having. Also setup an implement as well. The C1000 monitor is not very intuitive and agco really needs to step it up as far as a monitor goes. If you need help let me know I am not far away from you. When I got it to work and calibrate doing a software update was part of it but I am still not quite sure what all we did to get it to work. Also you have to be moving at 1 mph or above to engage autosteer. | |
|
Any way to test a TopCon AGI-4??
