|
northeastern Ohio | I bought a used TopCon AGI-4. I received it in the mail yesterday and installed it on my MF 8670 that I recently purchased used. The MF has a plug on the roof and I plugged it in. I started the tractor, but no lights came on the receiver and the C1000 monitor did not recognize that a receiver was hooked up. I hit the toggle button for autosteer and the button lit up, but still no lights on the receiver.
I do not have a pinout for the roof plug. I put one probe of my multimeter on a tractor ground and then touched each pin with the other probe. I found one pin that showed 11.9 volts.
So it looks like I have power to the plug. But the receiver does not seem to be powering up.
Both the tractor and receiver are used, but new to me. So the problem could be in either. All my other GPS stuff is Ag Leader, so I have nothing to hook this TopCon to test.
Anyone in northeast Ohio or western PA have a tractor/combine that I could test this receiver on? Or is there another way to test it? | |
|
Any way to test a TopCon AGI-4??
