N IL | cnycyclone - 7/27/2015 17:31 How do you get glonass into a 372 with a rtcmv3 stream.Using a CMR+ from a state cors network which is only tracking 8 satellites and losing reception around 5 in the afternoon. Also steering a MX 235 on a triple mower at 12+mphIt is starting to sway above that any ideas on how to tune this tractor for high speed?Thanks,
What are you current settings? On tractors we use for both low and high speed operations I usually have two differant profiles because 99% of the time you will always have to do some tweaking when going from one to the other. I would start by turning your steering gain up one point at a time and then when you think you are getting close adjust in .5 and then to really fine tune it you can adjust .1 at a time. Once the gain is about where you'd like it to be you can mess with agressiveness to fine tune a little more. The wieght of the triple mower may have an effect on steering performance as well kind of like the booms on a self-propelled sprayer.
The quality of your correction signal can effect steering performance as well.
 |
Trimble 372 with glonass
