East Central Illinois / West Central Indiana | This is not the supported fix but I have found it seems to work ... hook up with AP Toolbox and get into the screen where you can select/adjust engage aggressiveness. There should be a check box to select if you want engage aggressiveness turned on or not ... select the box then set the two sliders it gives you to about 80% each. You may have to play around with the percentages but I have found these two settings can typically get rid of magnum weave.
Beyond those two settings I would also suggest testing the low pressure standby and the regulated transmission pressure. I have seen both of these cure magnum weave as well. |
Magnum Accuguide Problem
