|
| Going to use a Raven SCS 660 with Pro 700. Understand from other discussions that I need a Raven 115-0159-822 cable and a cable from Case. Just not sure which cable from Case. On the back of our Pro 700 we have a male serial port pig tail that is attached to the 26 pin connecter for the Pro 700. Which cable do I need, the 87732647 or 84169716? I am also going to need the main Raven 660 cable. Is Raven the best place to get this? Since we are going to use this set up for both strip till and side dressing, the flow meter and control valve used with the 660 is too large for the reduced flow needed for the strip till. I have a smaller flow meter and control valve from Micro-tech. Will the flow meter and control valve (Micro-tech) interchange to be used with the 660. Thanks for any input
| |
|
Which cable (Pro 700 to Raven)
