roaming | jnlarson - 10/1/2014 08:11
I have an Easyguide 500 for GPS ,controlling Auto Pilot, and an Intelliview III for an air drill monitor. Wondering why I should need to have both.
Tractor is a 9380 Case IH.
TIA
You could use the IntelliView III (AFS Pro 300) to control the Autopilot system. You might be happier with the IntelliView IV (AFS Pro 700) because it's a larger screen and has more powerful electronics for better performance, but the small display should work too. There is a trade-up program now if you're interested; your dealer can give you the details.
You would need some adapter harnesses and an unlock to use the IntelliView III. Your dealer can give you exact pricing, but I think you'll be looking at around $2000 in parts/unlock, plus labor to do the conversion, which is pretty straightforward.
http://www.caseih.com/en_us/AFS/Documents/AFS_GuidanceCompatibility... |
CNH Intelliview control Trimble Autopilot?
