Denhoff,ND right in the center of the State | Place your decal on the machine, take some masking tape and secure 1/2 of it in a few places with some tape, remove the backing in the center to the other end and take a plastic spreader and start at the center of decal and work towards the end while holding the decal away from the painted part and let the spreader work it on the painted part, do not put the whole decal on at once, will wrinkle and get bubbles under it, when done with this end remove the tape and backing from the other end and do the same thing working from the center out to the end. Have done lots this way with very professional looking results, have always done mine dry but have heard you can put them on wet. Terry |