|
| So I am reading you right there are 4 wires coming from the 500 I need to figure out which are the can wires and redirect them into the fmx. Does the fmx get the tractor position then thought the can wires via tsip and direct steering from that? Does this act like the second receiver when the fmx asks for the second in setup? Meaning will I configure it to look for tsip on port c? I never had experience with anything less than a 750 with recievers in them to this point never have had to connect external ones.
Edited by fourcubs 8/2/2014 14:44
| |
|
EZ Guide 500 to FMX
