Sandy Hook, MB | tedbear - 7/31/2014 06:08 Not positive which MT servo valve you have but as I recall they didn't want to "see" anymore than 9 Volts. I was told to test them with a 9V battery rather than 12 Volts.
Hello Tedbear
I recently replaced my Micro-Trak controller with Field IQ & I had to change the flow meter sensor, & servo valve. The old servo valve was 6 volt, the new 1 is a 12 volt.
Addition: The old speed sensor had 2 wires, the new 1 has 3.
Reason for edit: Addition.
Edited by MCatSHF 8/1/2014 12:51
|