SE Michigan | Farmer4life01 - 7/29/2014 07:39
Okay so tell me if im heading in the right direction here or if im wrong my plan for fields that are like this shown in the picture that its a block of fields that nothing sepeates them im going to pick the straightest edge set a flag 30' off the boundary at one end then go 30' off the other with anoter flag and set my AB line will this work do you think? I dont think I want to go from the field say in the middle and set the line off the edge of the field I wouldnt think? we have a 40' bean planter 60' corn planter and 90' and i was hoping to get everything going in the same direction.
Farmer4life01
In our case with out AB lines being assigned to fields we often put the AB line in the middle of the field or near the entrance to the filed if it is not on the edge of the field. We are running 20 ft, 28.5 ft and 60 ft equipment. We only have one filed that has a straight side on at least one side so no matter what we do we have point rows so we divide them between each side this way. We also use the same line in fields that are next to each other or across the road from each other. We are also about 8 miles from the tremble base and are considering connecting to an Ag Leader base that is only 2 miles away or using a portable base we use for tiling.
|
My plan for setting up AB lines
