roaming | chedv - 4/17/2014 06:16
Good question, it always confuses me too. Does your case planter's width not automatically appear under implement when it's connected?
Once the planter has been set up, the widths should appear automatically any time the planter is connected. Until the planter is set up, the Implement Width, Swath Width, and Implement Offset on Toolbox > Implement will be 0. They'll fill in automatically after you specify the number of rows on the planter, the row spacing, and the Planter Swath Offset (if you need one). |
Implement width and swath width on Pro700?
