|
| System was not holding line well so it was recommended to recalibrate. During recalibration the system steers left then right then left and holds all the way left for a few seconds followed by a "hydraulic error". Raven support and local dealer have not given me any successful hits.
System was steering fine last couple years. Not sure what changed this year. Have checked electrical connections at l/r solenoids, it steers with the on screen manual steer, tried adjusting flow and pressure at the blue hydraulic valve block but have not found the sweet spot if there is one. Recalibrated the SPS sensor.
Any thoughts? | |
|
Need Raven Smartrax help
