|
NW Iowa | Intellislope on the Integra does roll correction for sidehills. There is a calibration just for that in the setup.
I'm not familiar with the Farmworks software but SMS allows you to take any elevation data such as elevation logged during tillage, planting, harvest, etc to layout tile lines and set the parameters for install. If you do it this way there is no need to survey when in the field. There is also the option to take just the display with a GPS receiver out and drive the surveys before hand, you can either set the parameters in the display when you go to tile or import them into SMS and set them up. | |
|
intellislope/wm drain with IMD-600 pitch control
