Central Kansas | JK SCLA - 7/1/2012 14:14
When you put a value in the offset column, there will be a toggle to place the offset on whichever side you need it on. If value is set at zero, then you will see the implement is centered. Put in a value and you can toggle right or left. I have two tools that I have to run with an offset, change it frequently. Also, you can do this on the go and shift track or re-center track if it is not what you like until you get it figured out.
OK............so do I understand that you have to manually toggle left and right if a tool pulls to one side...........EVERYTIME yo change direction? Just looked and see no automatic to it. |
Brown Box "Offset" Question
