|
Butterfield, MN | If it's doing this often, but not all the time, I wonder if maybe your unit is set to auto-detect instead of setting it to one particular differential sat. If you go into the tools button and press the Differential button, see what is highlighted in blue. If it is auto, tap down until you see 138 and tap on that. Now it will only be looking at 138 rather than possibly jumping between it and 133 or 135. This could cause a jump of a foot or more any time it does that, and turning around at the end of a row seems to be where it happens most often. | |
|
Cruizer II accuracy issues
