Lemme see if I can do this successfully from memory:

Brown -- 120 VAC safety circuit. This goes through all the alignment limit switches on the machine.

White -- common (neutral) for the 120VAC control circuit.

Purple -- either forward or reverse, can't remember which just now.

Pink -- either reverse or forward, see above.

Orange -- percent timer. This is carried through all the way to the last (outermost) tower on the machine and turns on/off the outermost tower.

Yellow - end gun.

Blue, Red, Black -- 480 V, 3-phase.

Bare or green -- ground.

If this doesn't get you going, flip up another posting or flip me an email. if you'd like the schematic, drop a line and I can FAX it or scan&email it to you.  If you can describe the problem, I might be able to tell you what/where it is.