| zoid - 1/17/2007 17:47
OK but I still don't understand. How does an implement move without the tractor guiding it? How does an implement steer itself?
Unfortunately neither the AF or Trimble link show the unit or pictures. I have only seen it on a orthman lister bar (3pt) and can only make minor corrections (couple of inches). The Orthman system is a set of coulters set at the rear of the bar that guide the bar like a steering axle. Sway blocks more than likely need to be removed for a 3pt mounted implement. Here is a link with a photo from orthman.
http://www.orthman.com/html603/orthag.htm
hope this helps.
Scott
Edited by FRMLPLR 1/18/2007 14:05
|