|
| I have posted this before but I got the rest of the info. I have a 500 hooked up to an autopilot. I want to take the 500 and use it as the gps source for the second receiver on the fmx for tiling and autosteer you need 2 gps receivers to do this. The setup is pretty straight forward for the fmx but I am less familiar with the 500. I know it will output NMEA but I cant figure out how to shut down any autosteer function. I keeps asking for it and will not let me configure the 500 to output NMEA. Is the 500 just outputting NMEA to the navII so that is already taking place or is the 500 actively involved in the steering? Any help would be great. | |
|
EZ Guide 500 to FMX
