|
NW IOWA | I have an ether injector on a 4240 and all of a sudden it quit working. It worked one day and then not the next and hasn't worked since. The solenoid clicks and the ether can is full, but the ether just runs down the side of the can and none goes to the motor. I replaced the rubber seal at the top of the can( the other one was fine) and it still leaks all over. Do I have a plugged ether line and the pressure just forces the ether out the seal. It's terribly hard to see anything as its buried under the hood and has a loader on the tractor. | |
|