Posted 4/8/2021 01:02 (#8939102) Subject: Magnum 275 hydraulic issue
Our number 1 remote on our 275 has started acting up and we need ideas of where to look. It will lower the implement fine but when going to raise you have to click the switch 5-10 times to get it to work and when it worked it was kind of slow. It's always had this happen randomly but not very often and usually one click to neutral and back and it would be fine. Now it is all the time. We switched the hoses to number 4 and it worked fine so I know it's not the implement. We called the case dealer and they said we needed to have a computer to figure it out. My dad being a mechanic forever thinks it can't be that difficult and thinking maybe a check valve or something. There are no codes and the light on the a post is working normal. Didn't know if it was the switch or in the valve stack somewhere.