|
| I am trying to hook up a pressure sensor to my manure plow "old Raven pressure sensor taken of a old spray rig" but it will not show reading using 16 as my calibration number. First under diagnostics Readings it only shows 5v were it is plugged into 12v in harness. I checked with volt meter and I am getting 12v but am not sure if it is a 5v or 12v sensor as everthing is alredy faded "numbers". Could I have damaged it if it is only 5v when I had it hooked up to 12v. | |
|
Calibrating raven pressure sensor on a GS3 2630.
