|
south texas | We swapped the valves for raise lower of 3pt from our 4955 to the 60 and it still will only build 1200 psi under a load. Empty the hitch goes to 2500.
Pressure relief valves have been changed and now both valves swaped. We also put the 60 valves in the 55 and it raised up just fine under load.
My next idea is to replace the valve body where the valves for the 3pt go. Is this valve body just a housing or is there linkages inside rockshaft housing?
If no linkages, seems a straigt forward swap.
Also just to repeat, we hooked scv up to rockshaft port and it built proper pressure so the issue is at the valve/housing.
Edited by coastalBend 10/27/2020 14:32
| |
|