|
lizton IN | Looked over the wiring didn't see anything. Other then the block heater plug wire was rubbing on a bracket. Fixed that. Then I started at the sensor to see if I had a wire broke at the plug. Pulled the protective cover off and found some bare wires. I put some tape on them and it worked all day today without a problem. Thanks for the help.
Keith
 (2018-09-15 09.42.21 (full).jpg)
 (2018-09-15 09.48.17 (full).jpg)
Attachments
----------------
 2018-09-15 09.42.21 (full).jpg (88KB - 32 downloads)
2018-09-15 09.48.17 (full).jpg (74KB - 33 downloads)
| |
|
update on Camshaft sensor
