|
Rensselaer, Indiana | Page 4567 of my S660 diagnostic manual has the following section. I'm feeling really dumb because I have not been able to find the "Test Valve" option in step #3. Is "GreenStar Display" my 2630 or the combine's smaller display? Is "Info" the section (which is called "Messages" or something like that) with the "i" in a circle icon? Where is "AutoTrac"??? I found some other AutoTrac info but nothing like "Test Valve." The only valve test I know is the SSU diagnostic routine, address 30, but that uses a clumsy operation involving the turn signal lever.
Help?
====================================================
Bleeding
1. Start engine run at high idle.
2. Turn the steering wheel fully to the left and fully to the
right 5 times
3. On the GreenStar Display, go to Info >> AutoTrac >>
Test Valve.
4. Enable the test mode.
5. With engine running at high idle, turn header height
control encoder on armrest control console left and
right 10 times to bleed the electro-hydraulic valve
(G24).
====================================================
Edited by kylerlaird 11/6/2017 07:22
| |
|
electrohydraulic steering valve purge from Greenstar
