|
SE - ND | Hello,
I'm in the process of trying to install an FMX into my Case 215. I don't want to use the hybrid harness as the cab top harness is long enough to reach the FMX so I would like to wire directly into it.
I understand pins 2,3, 4, and 5 are what need to be used. The cab top harness was as follows:
Pin 1, Yellow
Pin 2, Brown
Pin 3, Blue
Pin 4, Grey
Pin 5, White
Pin 6-9, Not Used
Pin 10, Red
Pin 11, Black
Pin 12 Green
Does anyone have the schematic for the 67120 harness they could provide or tell me what the correct pin configuration is to plug directly into the fmx?
Do I still need to go through the "FMX to NavController II cable with port replicator", 75741, into port C on the FMX?
Thank you for you time,
Edited by <>D 4/24/2017 07:39
| |
|