Just caught your post down the page and thought I would reply in a new post here.

http://talk.newagtalk.com/forums/thread-view.asp?tid=600748

Yes have a 8300 but since I have been transitioning more towards notill in recent years I don't put lots of hours on it. Still have occasions and areas though where it is used for chisel plowing and running a field cultivator.

Some of these pics are from several years back.

16 ft/ mounted Oliver /White 458 chisel plow will stop it in in hard conditions in our heavy soils.

Here is some old school moldboard plowing with Auto Von

And a little AutoVon chisel plowing in the same field a lot of years later. The burned grass on the left is the Co-op fouling up on wheat stubble burndown and smoking part of my grass lane.

Also pull a 30' 960 FC with 3 bar Remlinger harrow.

Chiseled some ground this fall after doing some tiling projects to level things out and rip up compacted areas. We tiled through some standing water after a 3" rain to replace some silted in/ broken down old tiles and had a muddy mess to get straightened out.

And a couple pics from 11/16/15 after cleaning up.

And a video pulling down an old corn crib in 2005.

Perfect cold snowy sunny day where everything came down just as planned.

Might take a bit to load but should open in windows media player.

http://photos.imageevent.com/vprb/farmmpgs/Corncrib%20Teardown%204.wmv