|
| I have a Trimble 252 receiver with a 450 joey radio running on a Pro 600 screen for autosteer. Fault came up saying no GPS. There was actually no satellites in diagnostics and therefore no position. However unplugging the radio from the 252 and selecting Waas/egnos brought the DGPS back. Plugged the radio back in and reselected RTK and all worked for a while. However the next time no GPS came up this sequence didn't work and we are now down to basic DGPS as every time the radio is plugged back in all GPS drops out.
Any ideas what to do? Could it be firmware, I know it hasn't been updated lately. If it's hardware, where would be the best place to get it checked out and repaired? | |
|