Central NE | Installed the ontrac2 in a 3640 that is not supported by agleader. Used a 1086 IHC bracket that would not work on that model due to having tilt steering. Used a Cat 35-55 model for it.
Anyway, the 3640 has two 3/8" holes already in the tilt steering column. See first picture.
Drilled two holes into the 1086 bracket and trimmed down 2 Chevy 4x4 swaybar bolt spacers and used 4" bolts to mount bracket to column. See 2nd picture.
Took an air file to the plastic column cover to fit over the exposed bolts. See 3rd picture. All buttoned up and ready to lock and roll.
Be Safe Gayle
Edited by gemarsh 1/8/2014 20:12
(IMG_201304131432.jpg)
(IMG_2013041330643.jpg)
(IMG_2013041350166.jpg)
(IMG_2013041314389.jpg)
(IMG_2013041326856.jpg)
Attachments ---------------- IMG_201304131432.jpg (70KB - 69 downloads) IMG_2013041330643.jpg (61KB - 73 downloads) IMG_2013041350166.jpg (44KB - 63 downloads) IMG_2013041314389.jpg (47KB - 69 downloads) IMG_2013041326856.jpg (72KB - 71 downloads)
|