|
![](/profile/get-photo.asp?memberid=16293&type=profile&rnd=77) Southeast Iowa | Since its so easy to post pictures here are more. We have two red 4wd's and didn't like the two levers for throttle and up shift and down shift. I removed the throttle lever and the shifter lever. then welded a stub on the throttle and mounted two solenoids to make it up shift and down shift the old setup was the lever that had a magnet on it and when you bumped it, it moved a magnet over the controller and contacted a reed switch inside. now the switch energizes the solenoid and acts like the magnet moving. has worked great with no problems for two years. the button on the front is for the skip shift. I moved the old handle for the shifter to the #1 remote the button on top turns on/off the anhydrous. no pics of that though.
Thanks for looking
loadstar
(9130 Shifter 001.jpg)
(9130 Shifter 002.jpg)
(9130 Shifter 003.jpg)
Attachments ----------------
9130 Shifter 001.jpg (52KB - 44 downloads)
9130 Shifter 002.jpg (32KB - 43 downloads)
9130 Shifter 003.jpg (23KB - 39 downloads)
| |
|