AgTalk Home
AgTalk Home
Search Forums | Classifieds (149) | Skins | Language
You are logged in as a guest. ( logon | register )

JD 8120
View previous thread :: View next thread
   Forums List -> Machinery TalkMessage format
 
Zinschalg
Posted 5/30/2011 11:40 (#1799038)
Subject: JD 8120


Backed the tractor in the shop this morning for a cleaning got done and the tractor will not move shift it out of park and the park lite stays lit shift to gear and the trans and info lites flash hit code button and get PCU62 code says in the book problem- attempted to shift from neutral to gear with operator out of seat (which I wasn't) Fix- return to seat shift to neutral resume normal operation, tried this several times and nothing changes! any ideas?
Top of the page Bottom of the page
Smoothlander
Posted 5/30/2011 11:43 (#1799039 - in reply to #1799038)
Subject: RE: JD 8120



Seat switch unplugged?
Top of the page Bottom of the page
Zinschalg
Posted 5/30/2011 11:50 (#1799047 - in reply to #1799039)
Subject: RE: JD 8120


I'll check but I don't think it would start if it was unplugged
Top of the page Bottom of the page
MeanGreen
Posted 5/30/2011 12:31 (#1799101 - in reply to #1799038)
Subject: Re: JD 8120


S.E. Michigan		I would disconnect battery and let computer/safeties reset - worth a try.
Top of the page Bottom of the page
d&dcattle
Posted 5/30/2011 12:57 (#1799144 - in reply to #1799101)
Subject: Re: JD 8120


have had this happen before. You need to push in the clutch pedal when you first start out if the seat switch is bad worked for me
Top of the page Bottom of the page
Zinschalg
Posted 5/30/2011 13:17 (#1799170 - in reply to #1799144)
Subject: Re: JD 8120


There were 3 different electrical connector behind seat that I took apart and replugged in then it worked!!
Top of the page Bottom of the page
Smoothlander
Posted 5/30/2011 13:37 (#1799180 - in reply to #1799170)
Subject: Re: JD 8120



Good to hear.
Top of the page Bottom of the page
fallpat
Posted 5/30/2011 14:45 (#1799242 - in reply to #1799180)
Subject: Re: JD 8120


pull up bottom seat cushion . Seat switch may be broken .My switch broke and had to replace entire cushion. You can jump around switch at plug for short fix.
Top of the page Bottom of the page
rweatherford
Posted 5/30/2011 19:15 (#1799483 - in reply to #1799038)
Subject: Re: JD 8120


Try using the clutch. If it moves then likely just seat switch or connection.
Top of the page Bottom of the page
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

(Delete cookies)