|
| Had our 7215R on the grain cart last fall for a bit and when trying to run the PTO to unload, anything over 1400 RPMs would kick out the PTO and give us a PTO turning too fast error, to adjust engine speed. Couldn't unload at full speed or even close to it. Had to shut off the PTO, then re engage it and unload at low RPMs. Had a Deere tech come out and replace the PTO sensor, that did not work. Then a couple days later had a couple communication errors shown in the pictures as well. I have the RPMs turned all the way up in the PTO selection screen, on the back of the tractor its on the 1000 pto setting, not 540, and I don't have the option to change the PTO setting in the cab on the command arm. Any ideas?
Edited by nordmset 4/27/2022 09:06
 (PTO Error (full).jpg)
 (Comm Error 1 (full).jpg)
 (Comm Error 2 (full).jpg)
Attachments
----------------
 PTO Error (full).jpg (176KB - 60 downloads)
Comm Error 1 (full).jpg (199KB - 63 downloads)
Comm Error 2 (full).jpg (178KB - 58 downloads)
| |
|
JD 7215R
