|
Iowa | Running row sense on a 60 series combine with a 612C. I would say the feelers do a great job 80-90% of the time but sometimes it gets off to one side and just kind of stays there for probably 10-15 seconds then decides to jump back to the center of the row. Watching voltage on the feelers while it’s steering down the row it seems like one side is doing most of the changing and the other stays at the “at rest” voltage so I assume that feeler isn’t touching a row. Do I need to bend the feelers closer together or change something else? Running a -1 offset and seems to drive down the center well. The rowsense is new for us this season so any help or input is appreciate! | |
|
RowSense
