|
Western Australia | I have looked at purchasing a used Morris 7300 tow between air cart. The rear hitch that attaches to the air seeder bar has the drawbar pin inside the back wheels. Other carts that I have looked at such as Flexicoil, Simplicity and Gason have the drawbar protruding out past the wheels. I will be pulling a 49 foot Primary Sales bar that has hydraulic tynes. Morris 8000 series also have the drawbar out past the wheels. Have this been a problem for any owners? Particularly when turning at the end of the run. The hitch also looks like it will need to be strengthened as the bar I have takes a lot to pull, I dont wont to have the frame cracking.
Second question is the original owner converted this cart to double shoot and replaced the fan with one from the 8000 series. How much extra oil will I need to run the fan? I will be turning it back to single shoot using 7 outlets.
My tractor is an Agcostar that has 130 liters a minute hydraulics, with a maximum of 100 liters at one remote.
Any feedback would be greatly appreciated thank you | |
|
Morris 7300 TBT Rear hitch strength
