|
Iowa | I have a 4 inch DMC system with 15hp that has never had close to the amount of capacity it was suppose to have. I've done all the obvious things suggested by the dealer and company including the use of a new air lock. My next move, although not suggested, is to try a different pulley to speed up the pump. I don't really care if the pump gets destroyed at this point. About the only thing left to try is a new pump anyway. The current level of performance simply is not acceptable. The dealer has another DMC pump available for sale. Are there any other companies that have a good pump available for a 4 inch system in Iowa? | |
|
4 inch Pneumatic Grain Transfer Systems
