|
northeastern Ohio | How do you test a 3 wire Banjo EV3100 electric valve? I hooked the black wire to the negative terminal of a battery. Then I touched the red wire to the positive and the valve closed. Then I touched the white wire to the positive and it makes a faint noise, but the valve doesn't move. I tried hooking both the red and white to the positive at the same time and nothing happens. I put it on the sprayer and it works fine. I have three "spare" valves that I want to test, but don't they don't have the weatherpack connector so it makes it difficult to test on the sprayer. Here's a picture of the diagram:
 (sprayvalve.jpg)
Attachments
----------------
 sprayvalve.jpg (110KB - 258 downloads)
| |
|
How do you test 3 wire Banjo electric valve?
