I bought the tractor a few months back and used in planting and now on the rake but the other day the ac iced up so after it finally rained the other day, we took the hood off and checked the radiator & condenser and they were both plugged up and had many fins bent over. After a full day of blowing, washing & straightening fins, it was nice and clean. The next day I check the pressurizer motor and it was bad so when I had all that apart I used my hot water pressure washer to wash all the dirt and crap out of that area then made sure the new motor worked and put it all together expecting it to really work good now. I ran it some this evening and when I got back in the tractor, the blower wasn't running.  The blower runs on all positions except high and the ac does not cool now. Do you think I got water in one if the cut out switches by the drier or what? Back in the old days when the chevy trucks ac wouldn't run on high, it was usually a blower motor resistor problem.

Any ideas?

tia