|
ECIN | We are trying to get gps to a GS 2600 using an AgExpress ISO Harness - http://www.agexpress.com/isotractor.php - in a Cat MT tractor. The tractor has autopilot with Nav II controlled by an Insight, and GPS is from a 432 RTK/GNSS. The diagnostic port from the autopilot is connected via db9 serial cable and null modem to the AgExpress cable "com port 1".
I have set the insight to output GPS using a baud rate of 19200, and have selected both GGA and GSA messages @ 5hz. So far these settings have not worked with the 2600.
My questions are these:
Does there need to be a null modem in the db9 cable from the diag port to the AgExpress "com port 1"
What other settings need to be entered into the insight and GS 2600 to get them to talk?
Edited by beiswanger 4/5/2011 10:18
| |
|
Insight/432 to GS 2600
