|
Eastern Ontario | Working on a 40 series JD SCV. I've installed new valves with new O-rings everywhere. Had to take out the cams as the detend cam roller was worn flat. Put in a new one and put everything back together like it was. I have the manual and adjusted the the valve timing as per instructions. Tested the SCV on the tractor. Right outlet gets pressure while the left outlet gets "0". What the heck???? Any ideas on what could have gone wrong. I think that even if the adjustment is a little off, there should be some pressure on the left outlet, but there's none. I'm stumped. Someone point me in the right direction please. | |
|
SCV adjustment
