|
Eastern Ontario | I found this old silo unloader winch that I'm going to use for my jib crane on the leg. Anybody know what position they were originally mounted? If I mount it with the large pipe plug down I can't get the cable to go straight up. If I mount it as in the picture the cable has a direct route to the top and I can use a drill to raise and lower it. I know the winch should be mounted at the top, but I'd need a crane to get it up there and a power supply up top to run it. Thanks.
(winch.jpg)
Attachments ---------------- winch.jpg (38KB - 373 downloads)
| |
|