|
WI | So I hooked up a JD 4830 Sprayer to a CIH FMX display via the RS232 cable. We are using the CIH display to run the guidance(works awesome) (trimble RTK signal) and then want to run documentation and automatic boom shutoffs on the GS2 2600. With the cable implemented it shows the GPS on the screen. We took the machine out and it appears that the swath control is working correctly- however I cannot get the map to paint- shows invalid gps signal on the diagnostic page in the GS2. Is anyone running this setup currently- one where you are using the Trimble RTK for documentation. This is the only missing piece in my puzzle. What am I missing- signal strength is not an issue- it must be a setup issue. I have looked through my settings on the FMX and tried to set them the best that I can but some of the language is different. Please help me.
| |
|
JD Sprayer with Trimble RTK for documentation
