Viewing a thread - Lets talk Deere NT drill rebuild parts(again)

You are logged in as a guest. ( logon | register )

Lets talk Deere NT drill rebuild parts(again)	View previous thread :: View next thread
Forums List -> Machinery Talk	Message format

Posted 3/7/2026 18:48 (#11576954)
Subject: Lets talk Deere NT drill rebuild parts(again)

SESD

Need to do some work on my 1890. Post if you have experience with any of these. Will try to have link for all. Looking at main pin, closing, and firming pivots. Also discs and gauge wheels.

I see exapta and quality drills have extended bushing for main pivots. Any reason not to use either of these over the factory style?
https://www.exapta.com/product/assembly-main-pivot-bolt-and-nut/
https://www.qualitydrills.com/storehome/p/asrs-main-pin-and-bushing-...

See Red E has a bearing style fix for the closing and firming pivots, and for a nicer price than bushing kits. Any reason to not use these?
https://rede-ag.com/product/press-wheel-bearing-pivot-fix-kit/
https://rede-ag.com/product/closing-wheel-bearing-pivot-fix-kit/

Also see Red E is selling a 18-5/8" disc. It is a Forge de niaux. Pro/cons over the normal 18"?
https://rede-ag.com/product/forges-de-niaux-200-18-5-8-cutting-disc/

Any difference between Red E and Needham for their urethane tires? Have some Needhams on the planter and had more trouble with them building up with mud/dirt than rubber wheels because of little to no flex.
https://rede-ag.com/product/urethane-replacement-gauge-wheel-tire/
https://rede-ag.com/product/needham-3-urethane-replacement-tire/

Edited by JRthefarmer 3/7/2026 18:48

(Delete cookies)